Kmc-controls STE-1422 Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Kmc-controls STE-1422. KMC Controls STE-1422 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 2
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
STE-1421/1422 1 Installation Guide
Installation Guide
Contents
Mounting and Wiring 1
Accessories 2
Specifications 2
Maintenance 2
Configuration 2
More Information 2
Important Notices 2
Mounting and Wiring
Immersion probes measure the temperature inside
pipes carrying liquid or steam and are installed in a
304 stainless-steel thermowell. Mount the thermow-
ell horizontally or with the open end facing down
(to allow any condensation to drain). Position the
thermowell to prevent contact with the inside of the
pipe.
1. Installthepipeingsrequired,bylocalcode,
for a thermowell into the dry/drained pipe. If the
systemispressured,useahottap.
2. Install the thermowell. (See the Accessories
section.)
3. Fill the well with thermal compound to ensure
complete conductivity from well to probe.
NOTE: The probe can slide within its collar on the
case as it is inserted into the thermowell.
4. Remove the screws holding the cover to the case
and remove the cover.
5. Insert the probe into the well and tighten the
threaded connection on the case.
6. Frominsidethecase,pushtheprobeasfarasit
will go into the well.
7. Feed the thermistor wire leads through the
conduit or hole opening.
8. Connect the thermistor wires to the cable with
bu-splicesorsoldering.(Wirenutsarenot
recommended.) The two-wire sensor is not
polarity sensitive.
9. Reinstall the cover and screws.
Thermowells Installed
ABS Enclosure
Metal Enclosure
4.56"
115.8 mm
3.320"
84.3 mm
Various Probe
Lengths
Ø 0.850"
0.25"
6.35 mm
304 Series S/S Probe
1/2" NPT
4.24
107.7 mm
Various Probe Lengths
8X Ø 0.875”
2.04
51.8 mm
4.0
101.6 mm
0.25
6.35 mm
304 Series S/S Probe
1/2” NPT
2.10
53.3 mm
0.875
22.2 mm
2.110"
53.6 mm
0.875"
22.2 mm
Temperature Sensor, Immersion
STE-1421/1422
Vista de pagina 0
1 2

Indice de contenidos

Pagina 1 - Contents

STE-1421/1422 1 Installation GuideInstallation GuideContentsMounting and Wiring 1Accessories 2Specifications 2Maintenance 2Configuration 2More Inform

Pagina 2 - 0.25"

STE-1421/1422 2 Installation Guide© 2014 KMC Controls, Inc. 717-019-17EKMC Controls, Inc.19476 Industrial DriveNewParis,IN46553574.831.5250www

Modelos relacionados STE-1421

Comentarios a estos manuales

Sin comentarios