Kmc-controls MCP-1140 Series Manual de usuario
Busca en linea o descarga Manual de usuario para Sensores Kmc-controls MCP-1140 Series. KMC Controls MCP-1140 Series User Manual Manual de usuario
- Pagina / 2
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Installation Guide
4” Pneumatic Damper Actuator
MCP-1040, 1140 Series
Mounting
Post Mounted - Typically used for internal duct mounting.
1. Position the damper for its “normal” position.
2. Connect the damper’s blade clip or drive arm with the clevis pin and cotter pin.
3. Mount the offset bracket to either the damper frame or the duct.
4. Check that the linkage will not bind as the shaft extends and retracts.
Right Angle Mounted - Typically used for external duct mounting.
1. Slide the crankarm over the damper shaft.
2. Determine whether the damper shaft must rotate Clockwise (CW) or Counter Clockwise (CCW.
3. Locate the half-circle cutouts on the outside corners of the bracket.
4. Place the appropriate half circle cutout over (for clockwise rotation), or under (for counter clockwise
rotation) the damper shaft.)
5. Loosely mount the actuator externally on the duct or air handling unit.
6. Leave sufficient room for adjusting and servicing the unit.
7. Position the damper for its “normal” position.
8. Tighten the crankarm set screws.
9. Check that the linkage will not bind as the shaft extends and retracts.
10. Firmly anchor the bracket to the duct. The actuator assembly is positioned for 90° rotation.
1
2
Indice de contenidos
Pagina 1 - Installation Guide
Installation Guide4” Pneumatic Damper ActuatorMCP-1040, 1140 SeriesMountingPost Mounted - Typically used for internal duct mounting.1. Position the da
Pagina 2 - Maintenance
Connections♦ Use 1/4" (6 mm) O.D. polyethlyene tubing.♦ Use only clean, dry control air. No attempt should bemade to use any other medium.NOTE: I
Relacionado con productos y manuales para Sensores Kmc-controls MCP-1140 Series
(2 paginas)
Sensores Kmc-controls MEP-4900 Manual de usuario
(0 paginas)
(0 paginas)
Sensores Kmc-controls HPO-5074 Manual de usuario
(2 paginas)
(2 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.095 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales