Kmc-controls TPE-1483 Series(2004-2008) Manual de usuario descargar pdf

Description

The KMC TPE–1483 series of pressure transducers

incorporates a Wet / Wet differential pressure

transmitter featuring low hysteresis, excellent

repeatability, and long-term stability.

Up to four field-selectable input ranges are available

in most models. The field selectable feature

provides a single model that can be configured to

cover all the input pressure ranges for any given

application.

Three output ranges are field selectable, 4 to 20mA,

0 to 5 VDC, and 0 to 10 VDC. The output signal is

factory calibrated and temperature compensated

for the highest start-up accuracy.

The TPE–1483 can be powered from either a 24

VAC nominal or 12 to 30 VDC power source.

TPE–1483 incorporates a rugged NEMA 4

enclosure.

TPE–1483 Series

Pressure Transducer

Specifications and design subject to change without notice.

Models

The following models are available

TPE–1483–1 0 to 5/10/25/50 psig/d

TPE–1483–2 0 to 10/20/50/100 psig/d

TPE–1483–3 0 to 50/100/250/500 psig/d

Features

◆ Push-button and remote zeroing terminal

◆ Uni-directional or bi-directional pressure range

selection switch

◆ High / low port swap switch to solve incorrect

plumbing for differential

◆ Normal or slow surge damping switch to

prevent false alarms and reduce noise

◆ Output polarity reverse switch

Application

KMC TPE–1483 Pressure Transducers are suited for

any application requiring a reliable pressure

monitor providing a dependable conditioned and

compensated signal output.

The TPE–1483 may be used with any liquid or gas

that is compatible with 17–4 PH stainless steel.

DO NOT USE for these applications:

◆ Oxygen service

◆ Explosive/hazardous environments

◆ Flammable or combustible materials

Valid late 2004 into 2008—

see Rev. C of this data

sheet for information on the

new case and board.

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - TPE–1483 Series

DescriptionThe KMC TPE–1483 series of pressure transducersincorporates a Wet / Wet differential pressuretransmitter featuring low hysteresis, excellen

Pagina 2 - Specifications

Pagina 3 - Installation Guide

Installation GuideWet-Wet Differential Pressure TransducerTPE-1483 SeriesMountingAvoid locations with severe vibrations or excessivemoisture. The encl

Pagina 4

WiringUse 22 AWG shielded wiring for all connections. Do not locate device wires in the same conduit aswiring supplying inductive loads.1. Connect th

Pagina 5 - Set-Up Continued

RANGEPRESSURE RANGEMODEL 1 2 3 41483-1 50 PSI 20 PSI 10 PSI 5 PSI1483-2 100 PSI 50 PSI 20 PS

Pagina 6 - Maintenance

717-019-06KMC ControlsP.O. Box 49719476 Industrial DriveNew Paris, IN 46553U.S.A.TEL: 574.831.5250FAX: 574.831.5252E-mail: [email protected]

Comentarios a estos manuales

Sin comentarios

Kmc-controls TPE-1483 Series(2004-2008) Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Kmc-controls TPE-1483 Series(2004-2008). KMC Controls TPE-1483 Series(2004-2008) User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Kmc-controls TPE-1483 Series(2004-2008)