Kmc-controls SAE-1152(NEW Style Board) Manual de usuario descargar pdf (Pagina 1)

SAE-1101/1102/1151/1152 Carbon Monoxide (CO) Detectors 1 Installation Guide

Installation Guide

Carbon Monoxide (CO) Detectors

SAE-1101/1102/1151/1152

SAE-1101/1102 Space Mount

Install the unit at least ve feet above the nished oor

of the area to be controlled. Do not install near doors,

windows, supply air diffusers of other known air

disturbances. Avoid areas prone to vibration or rapid

temperature change.

1. Remove the cover by loosening and removing the

four screws.

2. Remove a knockout from the top or boom for

wiring.

3. Aach the universal backplate directly to a

standard electrical box using two screws.

4. Aer wiring, conguring, and testing the unit,

reinstall the cover.

SAE-1151/1152 Duct Mount

Choose a mounting location in a straight section of

a return air duct. Mount at least 5 feet (or 7.5 duct

diameters) from corners and other items that may

cause disturbances in the air ow. Avoid areas prone

to vibration or rapid temperature change.

1. Cut a 1

⁄8-inch hole in the duct for the air sampling

tube.

2. Remove the cover by loosening and removing the

four screws.

3. Remove a knockout from the top or boom for

wiring.

4 . Insert the sampling tube into the duct. Use the

foam plug (included) to prevent air from entering

the enclosure, causing false readings.

5. Centering the sensor over the hole in the

ductwork, aach the unit to the ductwork by

threading four screws through the self-sealing

rubber gaskets on the backplate of the housing.

6. Aer wiring, conguring, and testing the unit,

reinstall the cover.

Mounting

Accessories

IEI-1001 LCD Display Module

(required for congu-

ration)

XEE-6111-040 Transformer, 120-

to-24 VAC, 40 VA,

single-hub

XEE-6112-040 Transformer, 120-to-

24 VAC, 40 VA, dual-

hub

4.9" W (124 mm)

7.22" H

(183 mm)

1.69" D (43 mm)

9.9" D (250 mm)

with duct

insertion tube

Models

SAE-1101 Space CO sensor (aer 5/2007)

SAE-1102 Space CO sensor with two relays

and audible alarm (aer 2/2007)

SAE-1151 Duct CO sensor (aer 12/2006)

SAE-1152 Duct CO sensor with two relays

and audible alarm (aer 11/2004)

NOTE: These instructions apply to units

manufactured aer the corresponding

dates shown in the Models list. For older

units (with a row of LEDs on the le side

of the board), see the original version of

this installation guide available on www.

kmccontrols.com.

1 2 3 4 5

Indice de contenidos

Pagina 1 - Installation Guide

SAE-1101/1102/1151/1152 Carbon Monoxide (CO) Detectors 1 Installation GuideInstallation GuideCarbon Monoxide (CO) Detectors SAE-1101/1102/1151/1152

Pagina 2 - CAUTION

SAE-1101/1102/1151/1152 Carbon Monoxide (CO) Detectors 2 Installation GuideUse 22 AWG shielded wiring for all connections. Do not locate device wire

Pagina 3 - Operation

SAE-1101/1102/1151/1152 Carbon Monoxide (CO) Detectors 3 Installation GuideSet-UpWarm-Up1. Verify that the detector is properly wired and all conne

Pagina 4

SAE-1101/1102/1151/1152 Carbon Monoxide (CO) Detectors 4 Installation GuideNormal (Conﬁguration) Menu PressandreleasetheMENUbuontoenterthe

Pagina 5 - Calibration

SAE-1101/1102/1151/1152 Carbon Monoxide (CO) Detectors 5 Installation GuideSpeciﬁcationsRange 0–300 ppmAccuracy and Operation Conditions ±3% of rea

Comentarios a estos manuales

Sin comentarios

Kmc-controls SAE-1152(NEW Style Board) Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Sensores Kmc-controls SAE-1152(NEW Style Board). KMC Controls SAE-1152(NEW Style Board) User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Kmc-controls SAE-1152(NEW Style Board) Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Sensores Kmc-controls SAE-1152(NEW Style Board). KMC Controls SAE-1152(NEW Style Board) User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Kmc-controls SAE-1152(NEW Style Board)