Kmc-controls HPO–5213 Manual de usuario descargar pdf (Pagina 1)

HPO–5211/5212/5213 1 Installation Guide

Mounting

Linkage to Barber-Colman Valves

1. Thread 1/4-28 jam nut (1) onto valve stem (5) until

3/8" of valve stem is above the nut.

2. Thread stem extension (2) onto valve stem (5) and

tighten against jam nut (1).

3. Thread nut (3) as far as possible onto stem extension

(2).

4. Placeatwasher(4)ontopofnut(3)(onHPO–5211

andHPO–5212linkageonly).

5. Screwlinkage(6)ontovalve.Tightenaluminum

bonnet adaptor (8) against valve mounting nut (13).

6. Thread2setscrews(7)inevenlyuntilscrewscontact

atsonbrassbonnet.Donotfullytightenscrewsto

atsonbonnet.

7. Loosen2screws(12)androtatelinkage(6)to

desiredpositioninrelationtovalvebody.Tighten2

screws(12).

8. Whilefacinglever(9),rotatelevercounterclockwise

untilconnectingrod(10)contactslowerstemnut(3).

9. Thread upper stem nut (11) onto stem extension (2)

until1/16"to1/8"ofstemextensionisvisibleabove

nut (11).

10.Rotatelever(9)clockwisetoliconnectingrod(10)

upandaroundatsonupperstemnut(11).

11.Whileholdingconnectingrod(10)withwrench

tokeepfromtwisting,tightenlowerstemnut(3)

against connecting rod.

12. Rotate lever (9) until valve stem is in full up

position.Loosensetscrewsonleverhuband

reposition so that the end of the lever handle is just

insidethelesideofthelinkagehousing.Tighten2

setscrewsonleverhub.

13. Proceed to appropriate actuator mounting

instructions.

Installation Guide

Valve-Actuator Linkage Kit

HPO–5211/5212/5313

Dimensions in

inches (mm)

Barber-Colman Valve Models

Valve Sizes (Medium temperature must not exceed 250° F)

1/2" to 1-1/4" 1-1/2" to 2"

VB-111-0-3-1 through VB-111-0-3-9

Use the HPO-5211 if using the MEP–5000 actuators.

Close-Offs = 1/2" @ 81#

3/4" @ 81#

1" @ 56#

1-1/4" @ 30#

Use the HPO-5212 if using the MEP–1200 actuators.

Close-Offs = 1/2" @ 362#

3/4" @ 362#

1" @ 288#

1-1/4" @ 178#

Not Available

VB-921X-0-4-1 through VB-921X-0-4-11

Use the HPO–5213 with the MEP–1200 actuators.

Close-Offs = 1-1/2" @ 66#

2" @ 32#

VB-922X-0-4-1 through VB-922X-0-4-11

VB-9253-0-4-1 through VB-9253-0-4-11

VB-9263-0-4-1 through VB-9263-0-4-11

VB-9273-0-4-1 through VB-9273-0-4-11

VB-9283-0-4-1 through VB-9283-0-4-11

VB-931X-0-4-1 through VB-931X-0-4-11

VB-9323-0-4-1 throughVB-9323-0-4-11

1 2

Installation Guide 1
Maintenance 2

Indice de contenidos

Pagina 1 - Installation Guide

HPO–5211/5212/5213 1 Installation GuideMountingLinkage to Barber-Colman Valves1. Thread 1/4-28 jam nut (1) onto valve stem (5) until 3/8" of v

Pagina 2 - Maintenance

HPO–5211/5212/5213 2 Installation Guide1. Rotatevalvelinkagelever(1)sothatvalvestem(andconnectingrod)isinfullydownposition.2. Depr

Modelos relacionados HPO–5221 | HPO–5211 |

Comentarios a estos manuales

Sin comentarios

Kmc-controls HPO–5213 Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Sensores Kmc-controls HPO–5213. KMC Controls HPO–5213 User Manual Manual de usuario

Indice de contenidos

Modelos relacionados HPO–5221 | HPO–5211 |

Comentarios a estos manuales

Kmc-controls HPO–5213 Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Sensores Kmc-controls HPO–5213. KMC Controls HPO–5213 User Manual Manual de usuario

Indice de contenidos

Modelos relacionados HPO–5221 | HPO–5211 |

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Kmc-controls HPO–5213