Kmc-controls HPO–5213 Manual de usuario descargar pdf (Pagina 2)

HPO–5211/5212/5213 2 Installation Guide

1. Rotatevalvelinkagelever(1)sothatvalvestem

(andconnectingrod)isinfully

downposition.

2. Depressactuatorsdisengagement

buon(5)andmanuallyposition

actuatorpointerbetweenthe20°

and 30°marks.

3. Placeactuatoroverlinkagesha

(2)andnon-rotationbracket(3).

4. Tighten2setscrews(4)onactuatoroutputhub

whileholdinglinkageleverinpositiontoensure

valvestemstaysfullydown.

NOTE: Valveisfullystrokedineachdirectionwith

less than 90° rotation of actuator.

1. Rotatevalvelinkagelever(1)sothatvalvestem

(andconnectingrod)isinfullydownposition.

2. Depressdisengagementbuon(5)onactuatorand

manuallysetpointertothefollowing

position:

For1/2"through1-1/4"valveswith

HPO–5212linkage,setpointerat

thirdmarkfromfullclockwise.

For1-1/2"through2"valveswith

HPO–5213linkage,setpointerat

secondmarkfromfullclockwise.

3. Placeactuatoroverlinkagesha(2)

and non-rotation pin (3) until cover on

actuatorrestsagainstcoveronlinkage.

4. Finger-tighten 2 coupler nuts (4) until

U-bolt(6)contactslinkagesha(2).

5. Holdthelinkagelever(1)inpositiontoensure

valvestemstaysfullydownwhileevenlytorquing

2couplernuts(4)to110–120in-lbs.Alsobesure

actuatorcoverisheldagainstlinkagewhile

tightening coupler nuts.

NOTE: Valveisfullystrokedineachdirectionwith

less than 90° rotation of actuator.

•

KMC Controls, Inc.

19476IndustrialDrive

NewParis,IN46553

574.831.5250

www.kmccontrols.com

[email protected]

Maintenance

Noroutinemaintenanceisrequired.Eachcompo-

nent is designed for dependable, long-term reliabil-

ity,andperformance.Carefulinstallationwillalso

ensurelong-termreliabilityandperformance.

Linkage to MEP–1200 Series Actuator

Linkage to MEP–5000 Series Actuator

1 2

Installation Guide 1
Maintenance 2

Comentarios a estos manuales

Sin comentarios

Kmc-controls HPO–5213 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Kmc-controls HPO–5213