Kmc-controls CSP-5002 Manual de usuario descargar pdf (Pagina 18)

CSP-5001/5002 VAV Flow Controller-Actuators 18 Applications Guide, Rev. B

Cooling with Hot Water Reheat

This application uses a CTE-5104 thermostat with

a VEP-43/VEB-46 series 3-way hot water valve to

control temperature in the conditioned space. The

valve shown below uses the (discontinued) MEP-

5062 or (fail-safe) MEP-5372 actuator for reheat

control.

With 0 VDC from the thermostat, the mixing valve

bypasses water from the supply to the return. As the

thermostat voltage increases, water begins owing

into the coil to allow heated air into the space. At 2°

below setpoint the full ow is sent through the coil.

NOTE: Jumper “T2” to “R2” for automatic

auxiliary ow for heating.





























(Former Ref. # APE-1-5017)

1 2 ... 13 14 15 16 17 18 19 20 21

Sin comentarios

Kmc-controls CSP-5002 Manual de usuario Pagina 18